After-sales Service: | 1 Years |
---|---|
Warranty: | 1 Years |
Certification: | CE, ISO |
Still deciding? Get samples of US$ 27560/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Rising film evaporators are suitable for dilute solutions with low concentration and heat-sensitive materials.
The solution is preheated to the boiling point, added from the bottom of the heating chamber, and strongly vaporized in the heating tube. The generated vapor drives the liquid to rise in the form of a film along the pipe wall. The liquid film continues to evaporate as it rises. The solution can reach the required concentration through the heating tube.
Rising film evaporators are mainly used for concentration, distillation and recovery of organic solvents in bioengineering, pharmaceuticals, beverages, petroleum, fine chemicals, water treatment and other industries.
The rising film evaporator is composed of buffer tank, preheater, heater, separation chamber, gas-liquid separator, condenser, cooler and receiving tank.
E101-Plate Preheater
E102-Heater
E103-Plate Condenser
E104-Snake Cooler
V101-Buffer Tank
V102-Coolant collection tank
S101-Separation Chamber
S102-Gas-liquid Separator
P101-Charging Pump
P102-Concentrate Discharge Pump
P103-Coolant Discharge Pump
P104-Water Ring Vacuum Pump
Rising film evaporator adopts decompression concentration technology, which greatly reduces energy consumption and operating cost.
The raw material is preheated to the boiling point or close to the boiling point, and is introduced into the tube from the bottom of the heating chamber. The high-speed rising secondary steam drives the solution to flow in the form of a film along the wall and evaporates; the required concentration is reached at the top of the heating chamber, and the solution is discharged from the bottom of the separator.
The vapor liquid separator separates the liquid carried by the steam, and the unvaporized liquid returns to the concentrator. The condenser liquefies the gas to achieve solvent recovery. The cooler cools the liquefied solvent to achieve full solvent recovery. The receiving tank collects and stores the liquefied solvent.
Model | RFE-500 |
Evaporation Capacity(L/MIN) | 500 |
Evaporation Temperature(ºC) | 55 ~ 75 |
Vacuum Degree(Mpa) | -0.06 ~ -0.095 |
Buffer Tank(L) | 500 |
Preheating Area(M2) | 2 |
Heating Area(M2) | 20 |
Condensing AreaM2) | 20 |
Cooling Area(M2) | 1 |
Coolant Collection Tank(L) | 300 |
Charge Pump(T/H) | 2 |
Concentrate Discharge Pump(T/H) | 2 |
Coolant Discharge Pump(T/H) | 1 |
Water Ring Vacuum Pump(L/MIN) | 833 |
Material | 304 |