| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Heating Mode: | Dielectric |
|
Still deciding? Get samples of US$ 3299/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The spray dryer is a drying equipment for processing solutions, suspensions or slurry-like materials. It uses the spray method to make the materials become mist droplets and disperse in the hot air. The materials and the hot air contact each other in a co-current, counter-current or mixed flow manner, so that the moisture can quickly evaporate to achieve the purpose of drying.
After filtering and heating, the air enters the air distributor on the top of the dryer, and the hot air enters the drying chamber evenly in a spiral shape. The material liquid passes through the high-speed centrifugal atomizer at the top of the tower, and (rotating) sprays into very fine misty liquid beads, which can be dried to finished products in a very short time in co-current contact with hot air. The finished product is continuously output from the cyclone separator at the bottom of the drying tower, and the waste gas is evacuated by the induced draft fan.
The spray dryer is mainly suitable for spray drying of suspended liquids and high-viscosity materials or solid-content liquids.
Chemical industry: battery raw materials, basic dyes and pigments, dye intermediates, compound fertilizers, catalysts, sulfuric acid agents, amino acids, white carbon black, etc.
Plastic resin: AB, ABS emulsion, urinary formaldehyde resin, dense rubber (urea) formaldehyde resin, polyethylene, polyvinyl chloride, etc.
Food industry: fat-rich milk powder, cocoa milk powder, milk substitute powder, animal blood powder, egg white (yellow) whole egg powder, etc.
Food and plants: oats, chicken juice, coffee, instant tea, flavored meat, protein, soybean, peanut protein, etc.
Ceramics: alumina, ceramic tile materials, magnesium oxide, talcum powder, etc.
| Model | LPG | ||||||||
| 5 | 25 | 50 | 100 | 150 | 200-3000 | ||||
| inlet temperature | ≤ 300°C | ||||||||
| outlet temperature | 80-90ºC | ||||||||
| evaporation volume (kg/h) | 5 | 25 | 50 | 100 | 150 | 200-3000 | |||
| drive type | electrical drive | mechanical drive | |||||||
| rotate speed(rpm) | 25000 | 22000 | 21500 | 18000 | 18000 | 15000 | |||
| spray tray diameter(mm) | 50 | 120 | 120 | 120 | 150 | 180-340 | |||
| heating diameter | electric | electricity, steam, fuel oil, gas | |||||||
| Electric heating power (kw) | 12 | 54 | 60 | 81 | 99 | ||||
| Dry powder recovery rate (%) | ≥95 | ||||||||
){kind=link}